2. Quick Setup
❶ Connect USB Type-C cable between host PC and Idea3588 USB Type-C port.
❷ Plug the USB-to-UART cable between PC and Idea3588 console connector.
On the host PC, start a terminal emulation program (such as SecureCRT) with the following serial port settings:
BaudRate |
Data Bits |
Stop Bits |
Parity |
Flow Control |
1500000 |
8 |
1 |
None |
None |
❸ Connect the board and monitor with a HDMI cable.
❹ Plug the 12V/3A power supply into the DC jack, Idea3588 will turn on and boot into system.