5. Flash Images

Step 1, unzip AndroidTool_Release_v2.43.rar on Windows.

Step 2, open AndroidTool_Release_v2.43\AndroidTool.exe

_images/AndroidTool.png

Step 3, keep pressing the Recovery key, connect PC and development board with Micro USB cable until the Windows PC shows Found One LOADER Device, then release the key.

Note

The USB power supply is only available for programming, and the current is not enough for the board to run.

_images/EM3288_recover.jpg _images/image020.png

Step 4, click Upgrade Firmware -> Firmware, select update.img. Click Upgrade to flash.

_images/Upgrade.png _images/Upgrade-OK.png

User can also update the firmware separately.

Step 1, Click the column on the right side for the path of the file want to flash.

Step 2, Select the checkbox on the left.

Step 3, Click Run to flash the image.

_images/Upgrade-single.png